Basic Info.
Transport Package
One Set in One Carton
Specification
GPDC750V160-HA
Product Description
System Statements
Environmental |
Parameter | Min | Typical | Max | Unit | Remarks |
Working temp. range | -20 | 25 | 55 | °C | For safety regulation and certificate |
Extreme. Temp. range | -40 | 25 | 60 | °C | -40°C ~-20°C, works loads. 55 -60°C, works with 4%/°C linear derating ouptut |
RH | 5 | | 95 | % | No condense |
Altitude | 0 | | 2000 | m | |
Input |
Parameter | Min | Typical | Max | Unit | Remarks |
Input mode | 3-phase / 5-wire | No neutral wire |
Rated voltage range | 323 | 380 | 437 | Vac | For safety regulation and certificate |
Start-up voltage range | 306 | | 505 | Vac | With full load |
Working voltage range | 265 | 380 | 437 | Vac | 315-265Vac, 15KW linear derates to 5kW with step 2%/V |
Max voltage | | | 560 | Vac | Not working, No failure |
Max current | | | 240 | A | Low voltage with full load, per phase |
Max power | | | 128 | KW | Input 323Vac/ output full load |
Time of soft start-up | 5 | | 15 | S | Time from plug-in to voltage rising to rated value |
PF | >0.99 | Rated input, full output |
>0.98 | Rated input, half output |
THD | THD<5% | Rated input, full output |
THD<10% | Rated input, half output |
GND | Housing case grounded |
Output |
Parameter | Min | Typical | Max | Unit | Remarks |
Rated voltage | 750 | Vdc | |
Voltage range | 300 | | 750 | Vdc | For safety regulation and certificate |
Rated current | 20 | | 160 | A | With single-charger mode, #1 or #2 |
10 | | 80 | A | With double-charger mode, #1 or #2 |
Rated power | | | 120 | KW | |
Voltage stability | -0.5 | | +0.5 | % | |
Ripple RMS | | | 1 | % | |
Dynamic response time | | | 200 | us | |
Dynamic response overshoot | -0.5 | | +0.5 | % | |
Efficiency | | | 95.8 | % | |
Noise | | | 65 | dB(A) | |
Current-sharing unbalanced rate | | | 5 | % | output current > 50% |
Cooling | Compulsory ventilation |
Protection against |
Parameter | Min | Typical | Max | Unit | Remarks |
Input over-current | Functioned by circuit breaker with plastic housing |
Input over-voltage | 455 | | 465 | V | |
Over-voltage recovery | 445 | | 455 | V | |
Input low-voltage | 250 | | 264 | V | |
Low-voltage recovery | 280 | | 305 | V | |
Overheated | | 57 | | °C | Auto recovery when cooled down |
Output over-voltage | 765 | | 780 | V | Manual recovery |
Output over-current | | | 164 | A | Constant current when over current |
Output short-circuit | |
Fan failure | Each every fan stops, the whole system stops. |
Battery reversed | No output when battery reversed |
Insulation | Automatic insulation test |
System error | During the charging process, the system will immediately stop working and break out the contactor for any emergency (Emergency switch triggered, BMS communication error, Control guiding error, etc.), and lower down the charger voltage to 60Vdc or less within 1s. |
Auxiliary |
Parameter | Min | Typical | Max | Unit | Remarks |
Output current tolerance | -1 | | 1 | % | Current <30A with +/-0.3A tolerance |
Output voltage tolerance | -0.5 | | 0.5 | % | |
DC meter tolerance | | 0.5 | | level | |
Low voltage Aux power supply | | 24±1% | | Vdc | Optional 20A |
| 12±1% | | Vdc | Optional 10A |
Charger cord length | | 5±0.2 | | m | |
Charger type | GB/T20234.3-2015 |
Insulation |
Parameter | Requirement | Remarks |
Input /Output | 3535Vdc/10mA//1min | No break-through or arcing for 1 min at 1 atm |
Input/Case | 3535Vdc/10mA//1min |
Output/Case | 2121Vdc/10mA//1min |
Insulation | When 1 atm, RH≤90%, insulation resistance under 1000Vdc > 10MΩ. |
EMC |
Parameter | Requirement | Standard |
ESD | Air discharge±8KV | GB/T 17626.2-2006(Criteria A) |
Contact discharge±6KV |
RS | Frequency: 80MHz~1000MHz; 800MHz~960MHz,1.4G~2.0GHz, EFI: 10V/m; Amplitude modulation : 80%AM(1KHz) | GB/T 17626.2-2006(Criteria A) |
EFT/B | PE: 2KV | GB/T 17626.4-2008(Criteria B) |
SURGE | 2KV±10% | GB/T 17626.5-2008(Criteria B) |
CE | CLASS A | EN55022 |
RE | CLASS A | EN55022 |
Mechanical |
Dimensions | (L×H×W)700 mm×1800 mm×600mm |
Weight | ≤165Kg(with power module) ≤95Kg(cabinet + distribution, no power module) |
Power module spec
Parameter | Unit | Min | Typical | Max | Conditions |
AC input voltage | Vac | 323 | 380 | 437 | |
Frequency | Hz | 45 | 50/60 | 65 | With rated load |
PF | | 0.99 | | | With rated voltage/load |
Input voltage range | Vdc | 300 | | 700 | |
Output current | A | 0 | | 20 | |
Output voltage stability | | | | ±0.5% | |
Voltage peak-to-peak | % | | | 1 | With 1x0.1uF ceramic cap and 1x10uF E-cap, testing bandwidth=20MHz |
Output power | KW | 0 | | 15 | |
efficiency | % | | | 95.8 | |
Input over-voltage protection trigger | Vac | 455 | | 465 | Automatic recovery |
Input over-voltage recovery trigger | Vac | 445 | | 455 | |
Input low-voltage protection trigger | Vac | 250 | | 264 | Automatic recovery |
Input low-voltage recovery trigger | Vac | 280 | | 305 | |
Output over-voltage protection trigger | Vdc | 765 | | 780 | Manual recovery |
Output over-current protection trigger | A | | | 20.5 | Constant current output when over current |
Short-circuit protection | A | Automatic recovery |
Overheated protection | | Automatic recovery at ambient 55C |
Address:
2f Spring Velley Blcv, No. 10 Longchang Rd, Baoan, Shenzhen
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Electrical & Electronics, Lights & Lighting
Management System Certification:
ISO 9001
Company Introduction:
Techone was founded in 2003, a leading energy-saving company in the power supply industry. There′s an independent industrial park with 80, 000 square meters in Pingshan district, Shenzhen, China. With more than 500 employees and many core intellectual property rights.
We supplies digital power supply units and control solutions, for HID/LED/UV lighting and non-lighting applications. Nowadays, more than one and a half million our product have been working world-wide for general and special applications, such Hydroponics plant growing, street lighting, UV water processing and so on. Our patented devices and technology enable you to save upto 50% energy while delivering the same or more brightness.
We provide a complete line of products for HID/LED/UV system, with mutiple dimming or remote-control, universal AC/DC input and wide-range output power. OEM/ODM is also welcome. Our product has always passed UL certification. Good quality and service will be promised.